3
Device installation
3.1
Package Contents
-
1 Bench platform
-
4 levelling feet
-
1 Indicator (the term indicator includes the indicator bracket which can be connected
to the column via the column adapter)
-
1 column (the term column includes the column itself as well as 1 column holder and 1
indicator adapter)
-
Safety Instructions and QR code with access to the detailed documentation
3.2
Requirements on location
-
Set up the device on a stable, even surface.
-
Position the device so that the power plug is freely accessible and the power cord is
not an obstacle or trip hazard.
-
Avoid placing the device in close proximity to a heater or otherwise exposing the
scale to heat or direct sunlight.
-
Do not expose the device to excessive temperature flutuations.
-
Protect the device from drafts that come from open windows or doors.
-
Avoid exposing the device to extreme vibrations during weighing.
-
Protect the device from aggressive chemical vapors.
-
Do not expose the device to extreme moisture over long periods.
3.3
Power supply
AC power is used to power the scale when battery power is not needed.
Plug the USB-C plug into the USB-C jack on the bottom of the unit, then plug the AC
power supply into a wall outlet.
Note:
Do not use the USB-C power supply cable for the PC communication. Instead use a
standard USB-C cable.
3.3.1
Battery Power
The scale can be used on AC power immediately. Allow the battery to charge for 12 hours
before using the scale on battery power. The Scale will automatically switch to battery
operation if there is a power failure or the power cord is removed. With AC power, the
scale is constantly charging, so the battery charge indicator (see Chapter
4.1.1.2
) will
remain lit. The scale can be operated during charging, and the battery is protected
against overcharging.
When the device is switched on, the battery status LED lights red while the battery is
charging and green when the battery is fully charged.
For maximum operating time, the battery should be charged at room temperature.
Bench scale Puro®
3 Device installation
EN-6
Minebea Intec
All manuals and user guides at all-guides.com
