Mine Site Technologies NS50, Руководство пользователя, Страница: 59 / 126

Recommended Settings Description Field
Setting is at 120 minutes by
default. Amount of time in minutes before
a client device is required to
re-authenticate. Authentication Timeout
This is specific to each site. IP address of the authentication
server. RADIUS server IP Address
By default the port number is
1812. Port number used by the access
point to connect to the
authentication server. RADIUS server Port
Password that matches with the
authentication server. Password used by the access point
to access the RADIUS server. RADIUS server Shared Secret
If selected, the user must always
use the same device when Access to the RADIUS server by
confirmation of the client device's
MAC address. MAC Address Authentication
connecting to the wireless
network.
A second RADIUS server can be configured if the primary server is not available or not responding. This
can be configured by clicking on the Advanced button as shown in
Figure 23: Second RADIUS server
configuration .
Figure 23: Second RADIUS server configuration
5.3.5 Configuring Asset Tracking and Location Based Services
The Tracking configuration screen establishes where AeroScout
®
tag reports are sent as shown in Figure
24: Tracking configuration screen . An ImPact network device can communicate with an AeroScout
®
Positioning Engine and / or a MST Tracker Engine. Configuration of the Access Point is not required
when communicating with an AeroScout
®
Positioning Engine as the device configuration is performed
via AeroScout
®
server tools.
If the Access Point is sending tag reports to an MST Tracker Engine, the Tracker Engine's IP address
must be entered into each Access Point.
NS50 User Manual 59 Revision A
Configuration Using the Web Interface