![Mine Site Technologies MinePhone MP10 Скачать руководство пользователя страница 23](http://html.mh-extra.com/html/mine-site-technologies/minephone-mp10/minephone-mp10_administrators-manual_1800990023.webp)
Chapter
3
Configuring Network Settings
This chapter describes how to edit network settings on a MinePhone
when it is in administration mode.
Topics:
•
Access Point (AP) Configuration
Note:
A passcode may be required to access the Network
Settings menu. Contact your system administrator for more
details.
•
Session Initiation Protocol (SIP)
Configuration
•
Real Transport Protocol (RTP)
Configuration
The
Network Settings
menu provides settings and modes for wireless
connectivity and remote server locations. The MinePhone requires the
following settings configured to connect to the network:
•
Trivial File Transfer Protocol
(TFTP) settings
•
Network Time Protocol (NTP)
Configuration
•
Access Point (AP)
— wireless connectivity to the network via
access points.
•
•
•
SIP server
— connection to the SIP server, which enables calls to
be made within the network and outside the network.
•
•
Real-time Transport Protocol (RTP)
— defines the packet format
for delivering audio over an IP network.
•
Trivial File Transfer Protocol (TFTP) server
— contains
firmware, site and device specific configuration files which
download to the phone on start-up.
•
Network Time Protocol (NTP) server
— The handset
synchronises date and time from a NTP server.
•
DHCP Enablement
— configuring the phone's IP address to be
static or dynamic using a DHCP server.
•
Network Mode
— selection to use the phone in Ad-hoc or AP
mode.
•
Wireless channel configuration
— Radio channels that connect
the phone to the network.
It is highly recommended that network settings for a fleet of
MinePhones are centrally configured using the Mine Site Technologies'
ImPact Communication Appliance (ICA). Using ICA will simplify
configuration, save time and minimise errors. Please refer to the ICA
Administrator Console Setup Guide for details.
Text Input
Selecting a setting will open the current value in a text editable field.
The following commands can be used across all of these menus:
•
Pressing
OK
will accept the current text and return to the last menu.
•
Pressing
Back
will backspace and edit the text.
•
The
*
key toggles between character
and numerical input
which is indicated in the top right of the screen.
MinePhone Administrator Guide
23
Revision E
Содержание MinePhone MP10
