![Mine Site Technologies MinePhone MP10 Скачать руководство пользователя страница 28](http://html.mh-extra.com/html/mine-site-technologies/minephone-mp10/minephone-mp10_administrators-manual_1800990028.webp)
Picture
Values
Description
Field
Default is
g.711a
Menu select
g.711a
,
g.711mu
,
g.729a
Codec Setting
Default is
RFC2833
Dual Tone Multi-frequency Signalling
(DTMF) is used in touch-tone dialling
when dialling a number to determine which
keys are pressed. The MinePhone has two
modes:
DTMF Mode
•
Inband
sends touch-tone signal as an
audible tone as part of the voice
conversation.
•
RFC2833
specifies a different RTP
message for DTMF digits which reduces
transmitted data.
3.4 Trivial File Transfer Protocol (TFTP) settings
TFTP settings are accessed via
Settings
>
Network
>
Signal Protocol
>
TFTP
. The MinePhone connects
to a TFTP server on the network to download firmware and configuration settings every time it is switched
on. A DHCP server can be used to provide the TFTP server address to the phone. The table below describes
the settings to connect to the TFTP server. The MinePhone must be restarted for changes to take effect.
Revision E
28
MinePhone Administrator Guide
Configuring Network Settings
Содержание MinePhone MP10
