Start-up:
1.
Before use, make sure the device is fully charged using the
medical-grade power supply
included with your device. From completely discharged, the battery will take 4 hours to fast-
charge mostly full and trickle until complete. Status of charge is reflected on screen by the
following symbols:
2.
To power on the device, click the
“Run”
button
3.
Once the device has booted you have the option of two data
collection modes,
Local
and
WiFi.
The device can also be
shutdown by choosing the
“Shutdown”
tab with the left
context
button
“
A”
.
4.
Select method of data collection by using the arrow keys to move
the outline around the Local or WiFi symbol and either clicking the
“Run”
or
right context button “B”
, to finalize selection.
Local Mode:
Local mode stores data locally on any standard SD card inserted into the device. The
device includes an SD card, but any other compatible SD card can also be used (SDHC cards are
recommended). Data collected to SD card can be transferred to any computer with MindWare BioLab
software installed for analysis.
1.
Make sure that a compatible SD card is inserted into the device before attempting to acquire
data. It is suggested to check for available space on the card before beginning data collection to
assure required space is available.
2.
Check device and local mode settings by selecting the
“Menu”
tab with the
right context button
“B”.
Charging Charge Complete
02
