Mindsets PAC-1403, Руководство пользователя

Страница: 3 / 4

3
Step 2
Solder on the loudspeaker using
two lengths of stranded wire.
The loudspeaker can be
connected either way round.
Step 3
Solder on a length of approximately
0.5m stranded wire to act as an aerial.
A telescopic aerial can be attached
instead. This is supplied
separately.
Step 1
Solder on the battery snap leads - ensuring that
the red lead is connected to +ve on the PCB.
Optionally pass wires through strain relief holes
before soldering.
Step 4
Solder on the tuning and
volume control potentiometers
as shown using three lengths
of stranded wire for each. The
variable resistor marked ‘A’ is for
volume control and the one marked
‘B’ is for tuning.
strain relief
holes