Mindsets BCE 003A, Инструкция по эксплуатации

Страница: 4 / 7

6 7
7. Make sure the switch on the battery
box is ‘OFF’, then insert 3 x AA
batteries into the battery box. Take
care to ensure the batteries are
inserted the correct way round.
8. Using one of the sticky pads, stick the
battery box to the top plate in the
position shown.
9. Use another sticky pad to stick the IQ4
controller on top of the battery box.
Cut the connector off the end of the
wires from the IQ4 controller.
10. Use the final sticky pad to fix the
connecting block to the top plate as
shown. Carefully strip the ends of the
wires from the IQ4 to expose the metal
wire strands.
Join the wires from the battery box
to the wires from the IQ4 using the
connecting block. (Loosen the screws in
the connecting block before inserting
the wires, then tighten the screws to
hold the wires in place).
11. Carefully strip the ends of the wires
from the motors to expose the metal
wire strands.
Insert these wires into the connecting
block on the IQ4 controller. The red
and black wires from the left motor
should connect into the left side of the
connecting block. Ensure the wires
are connected in this order: red, black,
black red.
connecting block