• Select patient tile by touching the digital
data area or the waveform area of the tile
• Select
DISPLAY
Tab
• Verify SpO
2
is assigned in digital data tile
i. If unassigned select digital data tile and
select SpO
2
from the parameter list box
• Choose
SELECT
to confirm
The batteries on the Panorama Telepack need to be
replaced. Does the SpO
2
module need to be removed
prior to battery replacement?
No. The “Communication Lost” message will be displayed
on the Panorama Central Station during the battery
exchange and the SpO
2
digital/waveform monitoring will
resume once the new batteries are inserted turning the
Panorama Telepack back on.
The SpO
2
module needs to be moved to another
Panorama Telepack to be used. Can it be disconnected
while the Panorama Telepack is on?
It is highly recommended the Panorama Telepack be
turned off prior to disengaging the SpO
2
module to
prevent any potential problems. If the SpO
2
module
is removed while the Panorama Telepack is still on a
“SpO
2
Communication Error” message is displayed on
9
P/N: 0077-00-0003-01 Rev B
Panorama
®
Telepack-608 SpO
2
Quick Reference Guide
Panorama_Telepk QRG_0003_rB.indd 13
3/18/10 3:13:37 PM
