*
内部资料
*
本文档中包含的信息涉及深圳迈瑞生物医疗电子股份有限公司秘密，均为内部保密信息，未经许可，不得外发。
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance.
This module certified that complies with RF exposure requirement under mobile or fixed condition, this
module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter's radiating structure(s) and the body of the user or nearby persons. Transmitting
devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices
associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter
separation requirement.
A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to
another location.
Note 2:
Any modifications made to the module will void the Grant of Certification, this module is limited to
OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or
install the device, only software or operating procedure shall be placed in the end-user operating manual of
final products.
Note 3:
Additional testing and certification may be necessary when multiple modules are used.
Note 4:
The module may be operated only with the antenna with which it is authorized. Any antenna that is of
the same type and of equal or less directional gain as an antenna that is authorized with the intentional radiator
may be marketed with, and used with, that intentional radiator.
Note 5:
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host was previously
authorized as an unintentional radiator under the Supplier’s Declaration of Conformity procedure without a
transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the
after the module is installed and operational the host continues to be compliant with the Part 15B unintentional
radiator requirements. Since this may depend on the details of how the module is integrated with the host,
SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. shall provide guidance to the host
manufacturer for compliance with the Part 15B requirements.
Note 6:
FCC ID label on the final system must be labeled with “Contains FCC ID: ZLZ-WLINK” or
“Contains transmitter module FCC ID: ZLZ-WLINK”.
