Mindray ePM 10M, Руководство оператора

Страница: 224 / 364

25 - 2
25.2.3 Setting the End Case Report
To set the end case report, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Report
column select
End Case Report
.
2. From the
Report Setup
page, set the following end case reports:
◆
Select the
Tabular Trends Report
,
Graphic Trends Report
,
Realtime Report
, and
ECG Report
tab,
and set these end case report by referring to section 25.7 Viewing Printer Status .
◆
Select the
Event Report
tab, and select the event that needs to be printed.
◆
Select the 12-Lead Interpretation tab, and set the switch of
Median Complex
,
Measurements
,
Interpretation
, or
Interpretation Summary
. For other settings, refer to section 25.7 Viewing Printer
Status .
25.2.4 Setting the End Case Report Period
To set the end case report print period, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Report
column select
End Case Report
.
2. From the
Select Reports
page, set the
Period
.
NOTE
•
End case report print period is calculated from the patient discharged time to the configured period.
•
Period setting is applicable to all the end case report.
25.3 Manually Starting a Printing Task
You can start a printing task manually.
25.3.1 Starting Printing from the Current Page
From the current page, select the button, if available, to start printing.
25.3.2 Printing Realtime Reports
Select the
Print
quick key to print a realtime report. You can also print a realtime report from the
Report Setup
page. For more information, see 25.3.3 Printing Normal Reports .
25.3.3 Printing Normal Reports
Normal reports refer to the following types of reports:
■ ECG Report
■ Realtime Report
■ Tabular Trends Report
■ Graphic Trend Report.
To print normal reports, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Report
column select
Report Setup
.
2. Select the desired report tab.
3. Check the settings.
4. Select
Print
.