Mindray DC-80A, Руководство оператора

Страница: 323 / 391

Probes and Biopsy 13-43
13.2.9 Disposal
Be sure to sterilize the needle-guided bracket before disposing of it.
Contact your MINDRAY representative when disposing of this device.
13.3 Middle Line
Middle Line helps to locate and observe the focus point of lithotripsy wave during lithotripsy
treatment. By means of providing information for the lithotripsy machine as well as a tool for
watching the procedure of lithotripsy in real-time, you can adjust the intension and frequency of the
lithotripsy wave through lithotripsy machine.
NOTE:
This function in the ultrasound system is for lesion (stone) location and observation only.
For details, please refer to lithotripsy machine accompanying manuals.

To enter the mode: touch [Middle Line] in the biopsy tab or preset a shortcut key for middle line
function (for details, see “12.1.6 Key Configuration”). Press the user-defined key to turn on the
function.

The middle line is a vertical dotted line located in the middle of the screen, the position
and direction of which cannot be changed.

There is a mark icon of “×” located on the middle line which can be moved up and down
along the line by rolling the track ball.

To use the Middle Line function of the ultrasound system:
a) Use the trackball to change the mark position and by adjusting lithotripsy machine
tools or patient posture to locate the stone center at the mark.
b) Read the depth of the mark by observing the depth caliper on the right of the image.
c) After the stone is located, refer to lithotripsy machine manuals to perform the
lithotripsy.

The depth of the mark is displayed in the image parameter area of the screen.