Mindray BeneFusion SP3, Руководство по обслуживанию

Страница: 10 / 80

1-4

Before using the internal battery, check the battery to make sure it has
enough power. Recharge the battery when needed.

The syringe with a Luer connector is recommended to effectively
prevent the patient from underflow due to the patient's tubing being
pulled off.
1.1.4 NOTE
NOTE

Install the equipment in a location where you can easily observe,
operate, and maintain it.

Keep this manual near the equipment so that it can be easily and timely
obtained when needed.

The software of this equipment was developed in accordance with the
requirements of the YY/T 0708 standard, minimizing the possibility of
risk due to program errors.

This manual describes the product in its most complete configurations
and features. The product you purchased may not have certain
configurations or features.

Please do not insert the equipment not specified by Shenzhen Mindray
Scientific Co., Ltd. into the multi-function interface.

During the infusion process, the syringe pump precisely controls the
infusion flow rate, infusion volume and infusion time, and monitors the
speed and direction of the stepper motor in real time to effectively
prevent overflow, underflow and backflush.

This equipment does not come into direct contact with the drug/patient.
Therefore no biocompatibility testing is required.
1.2 Equipment Symbols
The equipment you purchased does not necessarily have all of the symbols below.
Note! Read the
document attached
Power ON/OFF
AC Battery
AC/DC DC
Alarm Sound pause