5
◆
Check and Repair
Warning
Stop to supply power to the main circuit and wait sufficient time before
checking or repairing this CK10.
Electricity remaining in the condenser may cause of electric shock.
Do not change cabling while power is being supplied.
Otherwise, the user may get injured or the product and machine may get
damaged.
Do not reconstruct the CK10.
Otherwise, an electric shock may occur or the product and machine
get damaged. And the reconstructed product cannot get after service.
1-2. Note on Installation
(1) This product has been designed for indoor uses. The ambient temperature of the room
should be 0°~ 50°C .
(2) If the temperature of drive case is 50°C or higher, heat dissipation must be done to the
outside.
(3) Do not install this product under direct sunlight or near magnetic or radioactive objects.
