Mindeo FS390, Руководство пользователя

Страница: 116 / 127

108
8-2 Examples of setting and query commands
The following examples illustrate how a command should be constructed and transmitted to the
scanner.
Example 1: Append prefix “1N” to all symbols
Step 1:
1)
Set Prefix string setting to be “1N”.
2) Look up the parameter table in 6 Parameter Menus and the ASCII table in 11 ASCII table. The
target parameter index is “8001”.
3) Its numeral system is hexadecimal, indicated by ‘H’.
4) Using the ASCII table, “1N” is translated into “314E”.
5) Put all above parts and then append a prefix and a storage indicator ‘.’, thus,
“<SYN>M<CR>8001H314E.” is the command.
6) Upon receiving command, scanner response with “8001H314E<ACK>”.
Host: <SYN>M<CR>8001H314E.
Scanner: 8001H314E
8001 H 314E <ACK>
0x38 0x30 0x30 0x31 0x48 0x33 0x31 0x34 0x45 0x06
Step 2:
1)
Enable Prefix transmission.
2) Look up the parameter table in 6 Parameter Menus and the ASCII table in 11 ASCII table. The
target parameter index is represented by: “8201”.
3) The numeral system is decimal: ‘D’.
4) The value is translated as: ‘0’ and ‘1’.
5) Put all above parts and then append a storage indicator ‘.’ to construct the command:
“<SYN>M<CR>8201D01.”
6) Upon receiving command, scanner response with “8201D01<ACK>”.
Host: <SYN>M<CR>8201D01.
<SYN>M<CR> 8201 D 01 .
0x16 0x4D 0x0D 0x38 0x32 0x30 0x31 0x44 0x30 0x31 0x2E
Scanner: 8201D01<ACK>
8201 D 01 <ACK>
0x38 0x32 0x30 0x31 0x44 0x30 0x31 0x06
<SYN>M<CR> 8001 H 314E .
0x16 0x4D 0x0D 0x38 0x30 0x30 0x31 0x48 0x33 0x31 0x34 0x45 0x2E