2
Materials/Tools required:
1. Torpedo
level
2. Pencil
3. Silicone (100%) and caulk gun
4. Hot melt glue and hot melt glue gun
5. Clean, dry rags
6. Acetone
*
Two types of adhesive are needed to install the shampoo shelf because they
serve different purposes. The hot melt glue bonds immediately, but will not hold
the shelf for more than a few days. The silicone takes a few hours to cure, but
after curing, it and the hot melt glue together will secure the shampoo shelf
indefinitely.
*Please use acetone only.
Denatured alcohol or other water-based cleaners
are not acceptable. If you do not have acetone, wiping with a clean, dry rag
is an acceptable alternative.
NOTE:
The shampoo shelf should be located on the wet wall or in the corner of
the shower, adjacent to the showerhead and strategically located 48” above the
shower floor.
IMPORTANT NOTE:
The supports are molded with a built in 1/8” downdraft
towards the front (open side) of the shelf, for drainage.
(see illustration below)
