If you have any questions, please call MINCEY MARBLE CUSTOMER SERVICE at 1-800-533-1806.
Mincey Marble Mfg., Inc.
|
1940 New Harvest Road, Gainesville, GA 30507
|
800.533.1806
|
minceymarble.com
SCREW THE FIXED GLASS
PANEL, THE DOOR STRIKE
JAMB, THE HEADER AND
FOOTER TOGETHER USING
THE 1 1/4” SCREWS
BRUNSWICK BOW FRONT ENCLOSURE SYSTEM INSTALLATION
3
These instructions are to be followed assuming the Shower Pan is level and the Walls are plumb. The work area
VKRXOGEHFOHDQRIGXVWDQGGHEULV$IWHU\RXKDYHFRQ¿UPHGWKDWDOORIWKHUHPDLQLQJSDUWVDQGSLHFHVDUH
present, you are ready to begin by assembling the Frame structure of the enclosure. It is best to assemble the
)UDPHRQWKHÀRRUDQGWRXVHWZRSHRSOH7KHH[DPSOHLQWKHVHLQVWUXFWLRQVLVD´ZLGHVKRZHUDQGWKHGRRU
opens on the right.
The Slip-on Vertical Wall Jambs are Reversible. The Header and Footer Frames are Reversible, however, they
are per-drilled to accept the Fixed Glass Panel, so it will need to be determined which side the Door will open on
before the enclosure is to be assembled. In the example in these instructions, the Fixed Glass Panel will be on
the Left and the Door will be on the Right.
THERE ARE TWO PRE-DRILLED
HOLES TO ACCEPT THE FIXED
GLASS PANEL CLIPS - AND
THEY WILL BE ON THE LEFT,
SHORTER SIDE WHEN THE
DOOR WILL BE ON THE RIGHT
Press the BUBBLE SEALS onto the Fixed Glass Panel on the TOP and BOTTOM. Slide the MAGNETIC STRIP into
the Door Strike Jamb. Assemble the Door Frame by Screwing together the Fixed Glass Panel, the Door Strike
Jamb, the Header and the Footer using the 1 1/4” screws. There are Two Pre-drilled holes to accept the Fixed
Glass Panel Clips.
The holes will be located to the Left, Shorter side when the Door is to be installed
on the Right.
EXAMPLE OF THE DOOR
STRIKE JAMB AND
FOOTER BEING
ASSEMBLED
SCREW IN THE TOP
AND BOTTOM FIXED
GLASS PANEL CLIPS
(Bottom is shown)
Screw in the TOP and BOTTOM Fixed Glass Panels Clips securely using the 1/2” screws. The Bubble Seals
DQGWKH&OLSVZLOO¿UPO\KROGWKH)L[HG*ODVV3DQHOLQSODFHWKRXJK\RXZLOOZDQWWRXVHH[WUHPHFDXWLRQ
when moving the assembly around for the next few steps.
SLIDE THE MAGNETIC STRIP
INTO THE DOOR STRIKE JAMB
