2
Tools /Materials Required
1. Latex caulk for marble to drywall seams, color matched for your niche
2. Clean, dry cloths to clean amenities niche and wipe caulking
3. Construction adhesive for adhering amenities niche to the wall
4. Hot melt glue gun and glue sticks
5. 2’
level
6. Pencil
The rough opening for the amenities niche should be 15 1/2 “wide by 45” tall. You will
also need a minimum of 12” deep empty space where the amenities niche will be
installed in the wall. This is because, of necessity, the niche recesses into the wall.
Installing the Amenities Niche with coffee pot access:
1. Once the rough opening has been built, finish the substrate around the area of the
opening and paint or apply wallpaper before installing the niche and fan header.
2. Dry fit the amenities niche in the rough opening, to ensure it seats properly. Use the 2’
level to level the niche. Make a reference line at the top of the niche to align the niche
when installing.
3. Apply construction adhesive to the back of the amenities niche and install the amenities
niche. Note: you may want to use a small amount of hot melt glue to help hold the niche
in place until the adhesive has time to set.
4. Caulk with appropriate color latex or acrylic caulk around the edges of niche, where cast
stone meets drywall or painted or wallpapered walls.
5. After installation is complete, remove the protective film from the acrylic shelves, being
careful not to move the niche’s position.
6. Clean the niche and shelves with clean rags and clean water.
If you have any questions, please call Mincey Marble Customer Service at 800.533.1806
