Minarik DIGI-LOK DLC300, Руководство пользователя

Страница: 36 / 44

Decimal point location
The decimal point location number is shown when the
programming display itself contains four decimal points. There
are four available settings:
Screen setting Decimal point display
0.0.0.0 1800
0.0.0.1 180.0
0.0.0.2 18.00
0.0.0.3 1.800
Use the UP and DOWN push-buttons to change the decimal point
location number. When you’ve done this, you can stay in the
Programming Mode to correct a previous programming error or
you can go to the operating mode. Press
ENTER
to stay in the
Programming Mode. The SSF programming screen will be seen.
When you are ready to leave the Programming Mode, press and
hold the
ENTER
button while you also press the
UP
push-button.
Try to release both push-buttons at the same time.
26
250-0112-rev3.qxd 7/18/00 10:46 AM Page 26