Cleaning of the cap
Wipe off the ink of the cap rubber and cap cover with clean stick or waste cloth dipped in cleaning solution for
maintenance.
Cleaning of the wiper
Wipe off the ink of the wiper and bracket with clean stick or waste cloth dipped in cleaning solution for
maintenance.
Cleaning of the wiper blade
Wipe off the ink of the wiper blade with clean stick or waste cloth dipped in cleaning solution for maintenance.
Cleaning of the flushing tray
Apply the cleaning solution for maintenance to a clean stick, and wipe away any ink stuck to the place shown in the
figure.
5. Close the left and right maintenance cover.
6. Press
, complete the cleaning.
[Before cleaning]
[After cleaning]
Cap rubber
• After cleaning, make sure
that the cap rubber and mesh
in the cap are not removed.
Cap cover
[Before cleaning]
[After cleaning]
• After cleaning, make sure the edge of the wiper is
horizontal.
Bracket
Wiper
[Before cleaning]
[After cleaning]
Wiper blade
Flushing tray
• The coating may peel, but this
does not cause any functional
problems. It may get stuck to
the carriage, though, so peel
and wipe away any coating
that is peeling.
