Make sure to wear the attached
goggles and glove
when you work.
© 2014 MIMAKI ENGINEERING CO., LTD. M014557-02(D202548-12)-06062014
UJV500 Daily Care
With a view to using this machine in a better condition, please be sure to the following daily care
after at the end of the
daily work
. Please refer to “Daily care manual” for the detail.
1. Perform [HEAD MAINT.], move the carriage to the
maintenance position and open the left maintenance cover.
(1) Press the
key in LOCAL.
(2) Press the
key.
(3) Press
to select [HEAD MAINT.].
(4) Press the
key.
(5) Open the left maintenance cover.
2. Wipe off the ink of around the head and groove with clean stick or waste cloth dipped in
cleaning solution for maintenance.
3. If there is any ink stuck on the bottom surface of the left UV lamp, apply the cleaning
solution for maintenance to a clean stick and wipe the ink away.
4. Open the right maintenance cover.
Left maintenance
cover
MAINT.
• When you clean , fully be careful
not to touch the nozzle surface.
[Before cleaning]
[During cleaning]
[After cleaning]
• When you leave during maintenance (or cleaning), please make sure to complete the cleaning
by pressing
key. Without completing the cleaning, the nozzle part is left uncovered
and then outside light makes the ink cure, which causes nozzle clogging or the like.
• Wipe off so that cleaning solution
for maintenance will not remain.
Right maintenance
cover
IT
