5
(4) Replacing the Water ("Replacing the Water” Chapter 4 of the Operation Manual)
It is necessary to replace the water when the feeding belt becomes dirty.
Refer to "Replacing the Water" found in Chapter 4 of the Operation Manual before replacing the cleaning unit
water.
3. Periodically care (Once a week)
Users are advised to perform the maintenance works described below once a week so that the printer will
keep its high performance and accuracy over an extended period of its life.
(1) Peeling roller (“Cleaning the peeling roller” Chapter 4 of the Operation Manual)
Remove ink stain etc. adhering to the peeling roller at the
front side of the machine.
Moisten soft cloth with water or waterish mild detergent,
squeeze tightly and then wipe it off.
(2) Exterior (“Cleaning the Exterior Surfaces” Chapter 4, Operation Manual)
Depending on the using environment, the dusts or
sand powder could stick to the exterior of the main
unit. To avoid the entry of the dusts into the moving
part of the head, wipe them off with soft cloth dipped
into water and squeezed tightly.
