3
2
Soak the clean stick or the waste cloth in the
maintenance cleaning liquid and wipe off an
accumulated ink on the side of the head and
on the bottom surface of the slider.
• Never rub the nozzles.
(2) Capping Station ("Cleaning the Wiper and Cap" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean
the head frequently using the cleaning liquid for maintenance suitable for the ink used to avoid the stains on
the head.
• Use the cleaning liquid dedicated for the ink being used.
1
Move the carriage and open the
maintenance cover.
• Refer to the Step 1 to 2 of Chapter 4 “Cleaning the
Wiper and Cap” of the user’s manual to perform the
operation.
2
Clean the cap.
• Dip the clean stick into the cleaning liquid for
maintenance and wipe off the cap. Wipe off so that
cleaning solution for maintenance will not remain.
Clean with a clean stick or a waste cloth.
The nozzle part (Never
touch it.)
Clean the side surface of the head
(shown in deep red) with a clean stick.
Carriage
Cap
