12
If ink error occurs
If ink error occurs, a warning message will be displayed in the display of the printer, and all operations related ink
discharge such as printing and cleaning cannot be performed.
When ink error occurs: An “x” is displayed in the local ink remaining icon.
To display the details of ink error
(1) Press the [ENTER] key in the local mode of the printer.
• Here, warning messages unique to MBIS3 is explained. For other warning errors, refer to the instruction
manual of the printer.
• For the method of detailed display of warning error, refer to the instruction manual of the printer.
Message
Cause
Solution
NO CARTRIDGE
The middle cartridge is not set.
• Set the middle cartridge without fail.
The IC chip is not inserted into
the middle cartridge.
• Insert the IC chip.
The IC chip cannot be read
correctly.
• Contact with a call center.
WRONG CARTRIDGE
After replacing 2L ink pack,
you did not change the IC chip
to new one.
• When 2L ink pack was replaced due to running out of
ink etc., if you use the IC chip for old 2L ink pack without
change, the printer cannot detect the ink information of
new 2L ink pack. When you replace 2L ink pack, set the
IC chip attached to the replaced ink pack into the middle
cartridge.
INK NEAR END /
INK END
Ink in the middle cartridge
remains low.
•When ink in the middle cartridge gets low, “INK NEAR
END” or "INK END" appears and the cartridge LED turn-
ing on yellow. We recommend replacing to the 2L ink
pack early.
Replacing to the 2L ink pack, ink is supplied to the
middle cartridge, and the ink near end / ink end error
disappears.
• If ink end occurs in one supply path while drawing or
cleaning, the operation is terminated immediately.
• Even if you replace 2L ink pack while ink near end / ink
end is displayed, the error display will not be released
immediately. Wait until ink will be filled in the middle
cartridge. After the error state is released, printing and
cleaning etc. will be available.
Ink supply tube is broken.
• Replacement is required. Contact with a call center.
Replace tha spout rubber -
of ECO-CARTRIDGES
The replacement period of
the spout rubber in the eco
case has elapsed.
• Replace the spout rubber.
。
(
P. 25
)
