2
Tools required for Maintenance
Surroundings of the heads ("Cleaning the Ink Head and the Area around It" Chapter 4
of the Operation Manual)
The heads and their surroundings are the parts most liable to be tainted in this machine and if tainted, it could
cause adverse effects to the functions of the machine and the results of the printings. Moreover, as the head
itself uses very fine mechanisms, sufficient precautions are required for the care and maintenances.
1
Move the carriage to the left.
• Move the carriage referring to “Cleaning the Ink Head and
the Area around It” Step 1, Chapter 5 of the Operation
Manual.
2
Open the maintenance cover.
• Remove the screws and open the maintenance cover.
3
Clean the head and the surrounding area.
• Gelled ink and dust could stick under the slider (the gray
area in the figure below) and the surroundings of the head.
• To prevent gelled/ solid ink ground from pooling at the front
and rear of the carriage, scrape them off with clean stick
etc. In this case, never rub the nozzle portion of the head.
2. Daily care and maintenance
Item Name
Product No.
Clean stiick
SPC-0527
Maintenance liquid 07 kit
ML007-Z-K1
Wiper kit 400R
SPA-0191
KIMWIPE S-200
SPA-0207
Maintenance
cover
Nozzle
position
Clean with the clean stick.
Before cleaning
After cleaning
