MIMAKI JV400-130LX, Руководство по установке

Страница: 45 / 50

1
2
3
4
5
6
7
© 2014 MIMAKI ENGINEERING CO.,LTD. 7.6 P.9
R.1.2
INSTALLATION GUIDE > Outputting Plots > Image Quality Adjustment
Model JV400-130/160LX
Issued 2011.02.15 Revised 2013.10.10 F/W ver.
2.50
Remark
1.2
Rev.
7.6 Image Quality Adjustment
 Outline
Perform the adjusting function such as FEED COMP. and DROP.POScorrect.
 Working Procedures
 DROP. POScorrect
Compensate the parameter so that the drop positions of other heads are on the same line as the drop position of
reference head (Head 1A) in the Y-direction.
Perform compensating by the following combination of wave shape, Y-resolution and scanning speed.
WF1:900N,1200N
WF2:900N,1200N,900H,1200H
WF3:600N,600H (for only LX100)
1. Set Media at X-origin.
2. Display [#ADJUST] -> [PRINT ADJUST].
3. Select the waveform.
[

] / [

] : Switches
[ENTER] : Confirms (Next)
4. Select the Y-resolution and scanning speed.
[

] / [

] : Y-resolution & Scanning speed change
[ENTER] : Confirms (Next)
 Forward adjustment
5. Select “SiDir” on the [SELECT] display.
[

] / [

] : Switches
[ENTER] : Confirms (Next)
6. Press the [ENTER] key to draw the pattern.
[ENTER] : To start Pattern drawing
[

] : To the compensation display
(Without drawing)
FUNCTION
#ADJUST <ent>
#ADJUST
PRINT ADJUST <ent>
Set the drawing origin as follows;
(Set in [LOCAL] -> [ORIGIN])
X

0, Y > 0
#PRINT ADJUST
:WF1
WF2
WF3
#PRINT ADJUST
:900N
600N
600H
900H
1200N
1200H
#PRINT ADJUST
SELECT :SiDir
#PRINT ADJUST
SiDir :PRINT
Pattern drawing
ReDir
BiDir
#PRINT ADJUST
SELECT :SiDir