MIMAKI JV400-130LX, Руководство по установке

Страница: 26 / 50

1
2
3
4
5
6
7
© 2014 MIMAKI ENGINEERING CO.,LTD. 5. P.1
R.1.3
INSTALLATION GUIDE > Ink Set
Model JV400-130/160LX Issued 2011.02.15 Revised 2013.10.10 F/W ver. 2.50
Remark
1.3
Rev.
5. Ink Set
 Outline
For JV400-130/160LX, 4 ways of ink setting above are available.
This was set to four-color at the factory, however, by opening/ closing the joint, you can change it to another color.
The procedure to change to except four-color is as below:
 List of work procedures
Work operation Description Refer to
 1 Head cleaning Celan the inside of head and ink paths to be changed. 7.5 (p.8)
 2 Changing of Joint Confirm the above ink paths, and change the joint concerned. 5.1 (p.2)
 3 Pasting label on eco case Paste the label indicating ink color on the eco case. 5.2 (p.6)
M M
M
M
Y Y
M
W W Y
M
Or
M
M
W W Y
Or
G
Y G
Front face
Ink supply paths
(4-color ink set: )
Ink supply paths
(4-color + White ink set: )
Ink supply paths
(6-color + White ink set: )
Ink supply paths
(6-color ink set: )