MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 97 / 152

- 3.17 -
SETTING THE METHOD OF MEDIUM DETECTION [BOARD]
Set board detection to ON or OFF.
When the board is used, set board detection to ON.
ON : Board selection is possible at the time of board detection.
OFF : Board detection cannot be selected at the time of board detection.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [MEDIA SET].
4. Push the [ENTER] key.
5. Push the [ ] and [ ] key until the display gives
the indication [BOARD].
6. Push the [ENTER] key.
7. Push JOG keys [ ] and [ ] key to set board
detection to [ON ] or [OFF].
Here, select [ON].
8. Push the [ENTER] key.
9. Push the [END] key three times, and the menu
returns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
MEDIA SET
< ent >
TYPE.1
BOARD
< ent >
TYPE.1
BOARD : OFF
TYPE.1
BOARD : ON
TYPE.1
BOARD
< ent >
<< LOCAL >>
width : 1272mm