MIMAKI JV3 S SERIES, Руководство по эксплуатации

Страница: 74 / 130

- 4.4 -
Function mode
The FUNCTION mode consists of 16 items.
The 16 items can be registered for each of the following four types.
If the type has been registered for each medium type, it becomes easy to change plotting conditions
when the medium type is changed.
Example) Type1 : For Tarpaulin 1
Type2 : For Tarpaulin 2
Type3 : FF
Type4 : PVC
Registering a type
1. Make sure that the mode is LOCAL mode.
2. Push the [FUNCTION] key.
3. Push the [ENTER] key.
4. Select any of Types 1 through 4 by pushing the
JOG keys [ ] and [ ].
5. Push the [ENTER] key.
Setting Plotting Conditions.
page 4.5 through 4.9
Changing the type
If plotting conditions for types 1 through 4 have already been registered, settings can be selected
according to the plotting simply by selecting the type.
1. Perform steps 1 through 5 above.
Select a type.
2. Push the [END] key.
Plotting with the plotting condition registered for the selected
type is possible.
< LOCAL >
Width : 1272 mm
FUNCTION
SET UP
< ENT >
SET UP
SELECT
: TYPE . 1
SET UP
SELECT
: TYPE . 2
TYPE . 1
MEDIA COMP.
< ent >
TYPE . 1
MEDIA COMP.
< ent >