MIMAKI jV100-160, Запросы на уход и обслуживание

Страница: 24 / 36

4. Consumable Item Replacement
24
• Avoid ink dripping when removing the cap absorber.
6
Clean the carriage base.
Carriage base
7
Attach a new cap absorber.
• Push the tabs on the cap absorber into the slits at the rear of the C slider, and clip in the tabs at
the front.
Claw
Cap absorber
Push in to engage tabs.
8
Once replacement is complete, move the wiper back to the rear by hand.
9
Close the front cover, then turn on the power.
• Check to confirm that the carriage returns to the station.
Waste Ink Tank Replacement
Ink used during head cleaning and other processes is collected in the waste ink tank at the lower right of the
product.
This product keeps track of the waste ink level. A “Check Waste Ink Tank” message appears when the
preset level is reached. Use this a guide for replacing the waste ink tank.
• For a 2-liter tank, the preset level is 80 % (1.6 liters).
• Continuing to use the product without disposing of the waste ink may result in waste ink
overflowing from the waste ink tank. Visually check ink levels in the waste ink tank about once a
week.