10
(2) Replace the Cotton pad(MBIS) (“MBIS Maintenance” Chapter 4 of the Operation Man-
ual)
There is a cotton pad attached to the cap wiper section on the rear of the tank that is used to wipe off any ink
adhering to the underside of the cap when replacing ink bottles of the MBIS. Periodically replace the cotton pad.
(Recommended replacement period: Once every two weeks or once every fifth time bottles are replaced.)
6. Periodically care (once a month)
(1) Refill and check the cooling water (“Refill cooling water” Chapter 4 of the Operation
Manual)
It is recommended that check the amount of cooling water about once a month to keep the machine itself in
good working order.
When cooling water is a little, refill the cooling water.
7. Periodically care (Once every three months)
(1) Replacing the wiper (“Replacing the wiper” Chapter 4 of the Operation Manual)
The wiper is consumable.When the display indicates that it is necessary
to replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
8. Storage of media
Media should be stored in the little dust area, and not in direct sunlight. Avoid storing the media in the area
with high temperature and high humidity.
9. Storage of ink bottle
Be careful of the followings to store.
• Store the ink bottle in no direct sunlight, and no high humidity.
• As it's a delicate product, do not drop it.
• Ink IC should not be contaminated and discharged static electricity.
• Be sure to store the ink bottle and the ink IC together.
< LOCA L >
R e p l a c e a WI PER [ ENT ]
Ink bottle and Ink IC
