36
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
(2) Selection List (see page 12,13)
Select color-based or layer-based object cutting pattern. The selected option is dis-
played in the bottom list.
Only the checked objects are cut. In the color list, select the fill color and outline color
to display each object information.
(3) Sheet Size
Displays the cutting area based on the sheet size set in the plotter. Enter the sheet size
(width and length of the cutting area).
(4) Copy (see page 10)
Num (Number)
Enter the number of copies along the vertical and horizontal directions.
Margin
Set the margin between objects along the vertical and horizontal directions.
(5) Object
Offset
The origin point is set at the bottom right corner (Mimaki CG series) or the left corner
(Mimaki CF series) of the layout area. The default origin point is positioned at 0 mm
(both vertically and horizontally) of the layout area. Change the value of the origin to
move the object.
When using the MGL-IIc commands, the large-size object may overflow.
(see page 40)
Mimaki CG series
Mimaki CF series
