- 2 -
© 2021 MIMAKI ENGINEERING CO.,LTD.
Instruction
1
Turn the Leg upside down to make it stand on
its own by using the cushioning material
(upper side) in which the main body was
packed.
•
Assemble the right and left legs.
2
Fix the Caster holder to the Leg.
•
Secure it with the 3 screws (M5x15).
•
Assemble the right and left legs.
3
Remove the cushioning material and turn the
legs back in their original direction.
4
Turn the casters inward.
5
Use the cushioning materials (upper side)
again to make the legs (Right and Left) stand
on their own.
1. Push the cushioning material until it touches the legs.
2. Push the cushioning material until it touches the floor.
6
Attach the screws (M5x15) with make a gap
between.
•
Assemble the right and left legs.
1
2
Pay attention to the installation position
No good
No good
No good
OK
OK
OK
1
2
Gap
