MIMAKI CG-100SRII, Руководство по эксплуатации, Страница: 111 / 150

3-63
Other Useful Functions
3
Use
ful Func
tion
Make the media without uncut area
By over wrapping the start point and the end point arbitrarily, you can make the media without uncut area.
Specify the over cut function (valid/invalid) and the length of the over cut. If
the length of the over cut is set, when cut starts, cut will be performed from
the position to the front by the specified length and the tool will move up
going too far at the end.
1
Press the key in the local
mode.
2
Press the jog key or to select
[SET UP] .
3
Press the key.
4
Press the jog key or to select
[OVER CUT] .
5
Press the key.
6
Press the jog key or to select
OVER CUT setting.
•
S
etting value: OFF or a value from 0.1 to 1.0mm
(0.1mm unit
•
Setting proper over cut can reduce uncut area of start and
end point of a media easy to bend. If too large value is set,
the result may have a rupture
Over cut
part
D A T A C L E A R < E N T >
FUNCTION
S E T U P < E N T >
ENTER/HOLD
O V E R C U T < e n t >
O V E R C U T : O F F
ENTER/HOLD
O V E R C U T : 0 . 3 mm
0.1
～
1mm
0.1
～
1mm