Milwaukee M18 CHPX, Оригинальное руководство пользователя

Страница: 13 / 97

10
GB
English
TECHNICAL DATA
Cordless Rotary Hammer
M18 CHPX
Production code 4520 76 02 ...
... 000001-999999
Battery voltage 18 V
No-load speed 0 - 1350 min
-1
Rate of percussion under load max. 0 - 5000 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009 4,0 J
Drilling capacity in concrete 28 mm
Drilling capacity in steel 13 mm
Drilling capacity in wood 30 mm
Core cutter in concrete, bricks and limestone 75 mm
Chuck neck diameter 54 mm
Weight according EPTA-Procedure 01/2003 (Li-lon 4,0 Ah) 4,3 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 91,1 dB (A)
Sound power level (Uncertainty K=3dB(A)) 102,1 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete: Vibration emission value a
h,HD
Uncertainty K=
8,6 m/s
2
1,5 m/s 2
Chiselling: Vibration emission value a
h,Cheq
Uncertainty K=
7,1 m/s
2
1,5 m/s 2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and instructions
for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors.
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device off immediately if the insertion tool stalls! Do
not switch the device on again while the insertion tool is stalled,
as doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
Possible causes can be:
• it is tilted in the workpiece to be machined
• breakage of the material to be used
• the power tool is overloaded
• Do not reach into the machine while it is running.
The insertion tool may become hot during use. WARNING! Danger
of burns
• when changing tools
• when setting the device down