4
•
Do not position your body in the area where pow
-
er tool will move if kickback occurs.
Kickback will
propel the tool in direction opposite to the wheel’s
movement at the point of snagging.
•
Use special care when working corners, sharp
edges etc. Avoid bouncing and snagging the ac
-
cessory.
Corners, sharp edges or bouncing have a
tendency to snag the rotating accessory and cause
loss of control or kickback.
•
Do not attach a saw chain woodcarving blade or
toothed saw blade.
Such blades create frequent
kickback and loss of control.
Safety Warnings Specific for Sanding Operations:
•
Do not use excessively oversized sanding disc
paper. Follow manufacturers recommendations,
when selecting sanding paper.
Larger sanding
paper extending beyond the sanding pad presents a
laceration hazard and may cause snagging, tearing
of the disc or kickback.
Safety Warnings Specific for Polishing Operations:
•
Do not allow any loose portion of the polishing
bonnet or its attachment strings to spin freely.
Cat. No.
Volts
DC
No Load RPM
Spindle
Thread Size
Sanding Disc
Diameter
Polishing Pad
Diameter
M12BPS
12
High 0 - 8 300
Low 0 - 2 800
M9 x 0.75
2"
3"
funcTional descripTion
specificaTions
assembly
Warning
Recharge only with the
charger specified for the battery. For specific
charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
To
insert
the battery, slide the pack into the body of
the tool. Make sure it latches securely into place.
1. Trigger
2. Trigger lock
3. Spindle
4. Side handle
5. Spindle lock
6. Side handle sockets
7. Speed control
8. Fuel gauge
Installing Side Handle
The side handle may be installed on either side of
the gear case. Position side handle in the location
which offers best control and guard protection. To
install, thread side handle into side handle socket
and tighten securely.
Warning
Always remove battery
pack before changing or removing accesso
-
ries. Only use accessories specifically recom
-
mended for this tool. Others may be hazardous.
symbology
Volts
No Load Revolutions per Minute
(RPM)
Direct Current
C
US
Underwriters Laboratories, Inc.
United States and Canada
1
4
5
6
7
3
2
8
Tuck away or trim any loose attachment strings.
Loose and spinning attachment strings can entangle
your fingers or snag on the workpiece.
Additional Safety Warnings
•
Maintain labels and nameplates.
These carry im-
portant information. If unreadable or missing, contact
a
service facility for a replacement.
•
WARNING:
Some dust created by power sanding,
sawing, grinding, drilling, and other construction ac-
tivities contains chemicals known to cause cancer,
birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilat-
ed area, and work with approved safety equipment,
such as those dust masks that are specially designed
to filter out microscopic particles.
MILWAUKEE
®
Содержание M12 BPS-0
Страница 7: ......
