Milwaukee AG 12-115 X, Оригинальное руководство пользователя

Страница: 22 / 24

18
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Do not let any metal parts enter the airing slots - danger of short
circuit!
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly
GSPN
Milwaukee
"VTUSBMJB 5PMM'SFF5FMFQIPOF/VNCFS
&NBJM.JMXBVLFF!UUJCSBOETDPNBVPS.JMXBVLFF/FX;FBMBOE
5PMM'SFF5FMFQIPOF/VNCFS&NBJM
.JMXBVLFF!UUJCSBOETDPNBV
ELECTRONICS
AGV 12-125 X, AGV 15-125 XC, AGV 15-125 XE
Electronic smooth start for sa
G
e use prevents jerky run-up of the
machine.
A zero-voltage switch prevents the machine from restarting after a
power failure. On resuming work, switch the machine off and then
back on again.
The machine has an overload and anti-kickback safety function
and stops if it is overloaded. Please note that the machine will
automatically accelerate back to its original operating speed if the
load is removed from it. After it has reached its operating speed the
machine is ready for use again.
AGV 15-125 XC, AGV 15-125 XE
The built-in electronic
T
will keep a constant speed even under
increased load. In case of overload, the rotational speed XJMM be
reduced to standstill.
SYMBOLS
Please read the instructions carefully before starting
the machine.
CAUTION! WARNING! DANGER!
Always wear goggles when using the machine.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of European
Directive 2002/96/EC on waste electrical and electronic
equipment and its implementation in accordance with
national law, electric tools that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
If TVQQMZDPSEJTEBNBHFEJUNVTUCFSFQMBDFECZUIF
NBOVGBDUVSFSJUTTFSWJDFBHFOUPSTJNJMBSRVBMJGJFEQFSTPOTJO
order
UPBWPJEBIB[BSE
Class II tool Tool in which protection against
electric shock does not rely on basic
insulation only, but in which additional safety
precautions, such as double insulation or
reinforced insulation, are provided. There
being no provision for protective earthing or
reliance upon installation conditions.
Regulatory Compliance mark (RCM). This
product meets applicable regulatory
requirements.
Class II tool Tool in which protection against electric
shock does not rely on basic insulation only, but in
which additional safety precautions, such as double
insulation or reinforced insulation, are provided. There
being no provision for protective earthing or reliance
upon installation conditions.
Regulatory Compliance mark (RCM). This product meets
applicable regulatory requirements.