background image

3

SIDE PLATE ANGLE

CORRECT

Side Plate Filing Angle

Backward

Slope

Hook

 

80°

INCORRECT

Side Plate Filing Angle

 CORRECT  -  80°  Produced  automatically  if  correct 

 HOOK - “Grabs” and dulls quickly. Increases potential 

 BACKWARD SLOPE - Needs too much feed pressure, 

causes excessive wear to bar and chain. Results from 

DEPTH GAUGE CLEARANCE

 

 

clearance.

Flat File

Depth Gauge Jointer

Restore 

original 

shape 

by 

rounding 

the front

The depth gauge should be maintained at a 

clearance of 0.63mm (0.025"). Use a depth gauge 

tool for checking the depth gauge clearances.

Use a flat file and a depth gauge jointer to lower all 

gauges uniformly. Depth gauge jointers are availa-

ble in .0.50mm (0.020") to 0.89mm (0.035"). Use a 

0.635mm (0.025") depth gauge jointer.

Depth gauges must be adjusted with the flat file in 

the same direction the adjoining cutter was filed 

with the round file. Use care not to contact cutter 

face with flat file when adjusting depth gauges.

Содержание 49162715

Страница 1: ... cause chain breakage and or kickback Follow the manufacturer s sharpening and main tenance instructions for the saw chain Decreasing the depth gauge height can lead to increased kickback Always be aware of what you are doing when using the chain saw Use common sense Do not operate the chain saw when you are tired ill or under the Keep all parts of your body away from the saw chain when the unit i...

Страница 2: ...ning increas es the potential of kickback Failure to replace or repair damaged chain can cause serious injury Thesawchainisverysharp alwayswearprotective gloves when performing maintenance to the chain Cutting Corner Side Plate Depth Gauge Toe Gullet Heel Rivet Hole Top Plate to the same length as fast cutting can be obtained only when all cutters are uniform Wear gloves for protection Properly te...

Страница 3: ...er Restore original shape by rounding the front The depth gauge should be maintained at a clearance of 0 63mm 0 025 Use a depth gauge tool for checking the depth gauge clearances Use a flat file and a depth gauge jointer to lower all gauges uniformly Depth gauge jointers are availa ble in 0 50mm 0 020 to 0 89mm 0 035 Use a 0 635mm 0 025 depth gauge jointer Depth gauges must be adjusted with the fl...

Страница 4: ...d 2 Landing Drive Mangere Auckland 2022 New Zealand Designed by Milwaukee Electric Tool Corp Professionally Made in China for Milwaukee Tool Australia Milwaukee Tool New Zealand Printed in China WARRANTY AUSTRALIA and NEW ZEALAND SERVICE AUSTRALIA and NEW ZEALAND MILWAUKEE prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is ver...

Отзывы: