5
Fig.9
Fig.10
Blades and Light Kit Installation Instruction
1. Secure the blade to blade holder and Panel using screws provided, Attach the blade assembled
to motor and secure it through tightening the motor screws. Repeat above process to finish 5 blades
installation.(Fig.9)
Blade holder screws
Blade
Blade screws
Panel
Blade holder
2. Connect two wires from the bottom of the fan to two wires from the LED light kit.(Fig.10)
3. Twist clockwise the LED light kit into fan housing. Make sure light kit is secure
but not overly tight.(Fig.10)
LED Light Kit
