milTone Air Synth& MIDI Controller, Руководство пользователя

Страница: 17 / 21

ADSR
Arpeggiator
( ADSR display )
Sus Dec Atk
x
Rls
x x x
9 Arpeggiator
8 ADSR
30
29
There are 4 arpeggiator e ff ects that can be changed by pressing shift followed by button
4 or via the menu under “Arpeggiator - >Arp E ff ects.” A knob must be assigned to “Mod”
to vary the number of notes for pattern for Random Arp and Sweep. The arpeggiator
a ff ects instrument 1 when one note polyphony is selected. Only instrument 2 is a ff ected
when two or three note polyphony are selected.
9.1 Arp E ff ect
Below is a breakdown of the arpeggiator e ff ects available.
A “Mod” of value 1 has no e ff ect on rand arp and sweep.
- No pattern is applied
None
Random Arpeggiator
Arpeggiator Chain
Sweep
1
Max step
size
= 16
Envelope
Level
0
127
Time
Attack Decay Release
Sustain
Level
Knob 3
Mod
- Random arpeggiator will play a random note between the root note and within the
step size selected using knob “Mod”. Hold shift and button 3 or 4 to cycle to “Mod.”
- Arpeggiator chain is explained in detail on the following page.
Arpeggiator
- Arpeggiator is explained in detail on the following page.
- Sweep will continue to play the next note in the selected scale until the “Mod”
step size is reached. Hold shift and button 3 or 4 to cycle to “Mod.”
The “attack” and “decay” of a sound have a significant e ff ect on the instrument’s sonic
character. Navigate to a m!lTone Mode menu item and scroll to “ADSR” to modify the
instruments ADSR envelope. The contour of an ADSR envelope is specified using four
parameters Attack, Decay, Sustain, and Release. A sustain value of 127 and long release
time is recommended when using the Air sensor ( s ) .
Release time - the time taken for the level to decay from the sustain level to zero
Sustain level - the level during the sustain phase of a sound
Decay time - the time takes for a sound to reach the sustain level from peak level
Attack time - the time takes for a sound to reach its peak level
Monday, December 15, 2014