Milton Roy LINC 21593, Инструкция по эксплуатации

Страница: 5 / 24

LEVEL CONTROL SWITCHES
L I N C - L 4 7 1 & L 4 7 1 S C S E R I E S
Specifications: L471 & L471SC Series Electric Level Control Switches
Pressure: 1,500 psi standard, available to 5,000 psi, (1,500 psi maximum with the Manual Override option)
Temperature: 40°F to + 400°F standard.
Specific Gravity: 0.4 minimum standard; interface 0.1 differential minimum
Materials:
316 stainless steel wetted parts are standard.
Switch Rating: SPST (SPDT optional) 100 V.A. AC, 100W DC, 3 amp inrush capability, maximum of 250 Volts, Hermetically sealed
Connections:
Electrical: 112" conduit standard, with other sizes optional
Process: 1 112" NPT standard, available in 2" NPT, 3" flanged or larger, and externally caged
CSA Certification: Listed as explosion proof for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; and Class III, Div. 1
Ordering Chart:
Series:
L471 Electric level control
L471SC Externally caged electric level control. Note:
The body style is always "0" due to ring bolt.
1,500 psi WP standard; 3,000 psi WP available 2
Body Style:
0 Standard, 1 112" NPT (ring bolt on L471SC)
1 Standard, 2" NPT
2 Standard, 1 112" NPT, manual override 3
4 Standard, 2" NPT, manual override 3
3 Extd. body
4
, 2" NPT, vertical displacer
6 Extd. body 4 , 2" NPT, vertical displacer, manual
override
7 Extd. body
4
, 2" NPT, horizontal displacer
8 Extd. body
4
, 2" NPT, horizontal displacer,
manual override
Type:
1 Standard
2 High pressure, 5,000 psi polypropylene
displacer, temp. +180°F max, spec. grav. 0.6 min.
CSA rated to 1500 psi per single seal rating
( onsult factory for higher ratings) c
3 Interface, 5,000 psi polypropylene displacer,
temp. +180°F max, upper fluid less than: .870
spec. grav; lower fluid more than: .970 spec. grav.
4 Other gravities for interface, specify gravities
of fluids (upper & lower)
9 Displacer, 5,000 psi polypropylene displacer,
temp. +180°F max, spec. grav. 0.5 min.
Other 5 :
02 Annulus plug
03 -N Relay assembly
1
, general purpose plug
in, 24VDC DPDT 10 Amp
04
-N
Relay assembly 1 , general purpose plug
in, 120VAC DPDT 10 Amp
08
-N
Relay assembly
1
, hermetically sealed plug
in, 24VDC DPDT 10 Amp
09
-N
Relay assembly 1 , hermetically sealed plug
in, 120VAC DPDT 10 Amp
05 This number means special; specify your
requirements. i.e. 3" flanged 150# RF
Option Number:
( ) Factory will assign an option number based on
specified requirements.
1 When a relay assembly is used, Class I, Div. 1, is limited to Groups C, and D.
2
L471SC pressure limitation is 3,000 psi on cage.
3 Not available on L471SC.
1500 psi maximum. Manual override.
4 Body style 3, 6, 7, 8 available only Type 9.
5 /f no further requirements are desired, omit "Other" option codes from the part LINC- - - (
number.
Examole: LINC-L471-21-05 electric level control
L I N C L I N C M I L M I LT T O N O N R R O O Y Y •• 2 0 1 2 0 1 I V Y L A N D I V Y L A N D R R O O A D A D •• I V Y L A N D I V Y L A N D P PA , A , 1 8 9 7 4 1 8 9 7 4 •• U S A U S A •• T E L . T E L . 2 1 5 . 2 9 3 . 0 4 6 5 2 1 5 . 2 9 3 . 0 4 6 5 •• F F A X A X 2 1 5 . 2 9 3 . 0 4 9 8 2 1 5 . 2 9 3 . 0 4 9 8 Page 4