Milnor MP1540 Series, Руководство пользователя

Страница: 18 / 107

Milnor
® Allied
Interface Specifications and Signals, Single Stage Press
PELLERIN MILNOR CORPORATION
3.
Signals—Single Stage Press With Mark 5 Controls
[Document
BICALC14]
Table 1: Loading Interface Numeric Input Signals and Digit Order—Single Stage Press
Common
Conn.
Most
Significant
Dedicated Connections (Binary Data Signals)
Least
Significant
Signal name on schematic
(e.g., Drycode A, B, etc.)-->
K J H G F E D C B A
Multi-terminal TBA WC2 WC2 WC2 WC2
Pin Number 7 7 16 18 17
Wire Number 7 232 244 243 242
Display/code -- i2/C i1/p i1/o i1/n
16 Drycodes
(00 - 15)
Board/code -- io2/6 io1/15 io1/14 io1/13
Multi-terminal TBA WCI WCI WCI WCI
Pin Number 7 16 15 8 7
Wire Number 7 341 342 331 332
Display/code -- Not available
16 Destina-
tion Codes
(00-15)
Board/code -- io3/15 io3/14 io3/7 io3/6
Multi-terminal TBA WCI WCI WCI WCI WCI WCI WCI WCI
Pin Number 7 18 17 14 13 12 11 10 9
Wire Number 7 396 391 343 344 347 348 349 340
Display/code -- i2/G i2/F Not available
256 Custo-
mer Codes
(000-255)
Board/code -- * * io3/13 io3/12 io3/11 io3/10 io3/9 io3/8
Multi-terminal TBA WCI WCI WCI WCI WCI WCI
Pin Number 7 6 5 4 3 2 1
Wire Number 7 333 334 337 338 339 330
Display/code -- Not available i2/T i2/S i2/R
64 Goods
Codes (00-
63)
Board/code -- io3/5 io3/4 io3/3 io3/2 io3/1 io3/0
Multi-terminal TBA WC2 WC2 WC2 WC2
Pin Number 7 4 3 2 1
Wire Number 7 237 238 239 230
Display/code -- i1/t i1/s i1/r i1/q
16 Extract
(Press)
Codes (00-
15)
Board/code -- io2/3 io2/2 io2/1 io2/0
* Customer codes G and H use direct inputs on the processor board, not inputs on the peripheral boards.
Table 2: Loading Interface non-Numeric Signals and Enabling Order—Single Stage Press
Common Connection* Dedicated Connection
Signal
Direc-
tion
Multi-
terminal
Pin Wire
Multi-
terminal
Pin Wire
Display
/ code
Board /
code
Function Name / Signal Name
Output* WCY 17 312* WCY 16 132 o1/j o1/1 load allowed / press free
Milnor will read in all batch data (previous table and next three signals) when it receives the "transfer complete / press loaded"
signal.
Input WCY 22 7 WCY 10 411 i1/i io1/8 new customer
Input WCY 25 7 WCY 13 414 i1/l io1/11 single cake
Input WCY 26 7 WCY 14 415 i1/m io1/12 empty load
Input WCY 21 7 WCY 20 386 i2/P ** transfer complete / press loaded
* For outputs from Milnor, Milnor does not normally assign either pin of the potential-free contact as the common. Hence, both pins
have unique pin and wire numbers.
** This signal uses a direct input on the processor board, not an input on a peripheral board.
14