background image

Published Manual Number/ECN: H000000013/99462N

•  Publishing System: TPAS
•  Access date: 1/18/01
•  Document ECN's: Latest Available

Kit Instruction—

KXMIC00155

PELLERIN MILNOR CORPORATION

POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Содержание KXMIC00155

Страница 1: ...al Number ECN H000000013 99462N Publishing System TPAS Access date 1 18 01 Document ECN s Latest Available Kit Instruction KXMIC00155 PELLERIN MILNOR CORPORATION POST OFFICE BOX 400 KENNER LOUISIANA 70063 0400 U S A ...

Страница 2: ...ublishing system access date and whether the document ECN s are the latest available or exact References to Yellow Troubleshooting Pages This manual may contain references to yellow pages Although the pages containing troubleshooting procedures are no longer printed on yellow paper troubleshooting instructions if any will be contained in the easily located Troubleshooting chapter or section See th...

Страница 3: ...etal screws 7 Install the new processor board in the machine you may need to space it out further than it was to clear the surrounding wires Use the spacers that were on the memory board The hole pattern is the same as the old processor board 8 Install the video card into the slot on the processor according to the tag Use the plastic hardware to mount the bracket to the board 9 The cable coming fr...

Страница 4: ...ROM INSTALL IN SOCKET IC29 b IF THERE ARE 2 EPROMS INSTALL 1 EPROM IN SOCKET IC30 AND 2 EPROM IN SOCKET IC29 c IF THERE ARE 3 EPROMS INSTALL 1 EPROM IN SOCKET IC63 2 IN SOCKET IC30 AND 3 IN SOCKET IC29 d IF THERE ARE 4 EPROMS INSTALL 1 EPROM IN SOCKET IC64 2 IN SOCKET IC63 3 IN SOCKET IC30 AND 4 IN SOCKET IC29 2 MAKE SURE THAT ALL PINS ARE IN THEIR HOLES WHEN INSERTING BE CAREFUL NOT TO BEND PINS ...

Отзывы: