Milnor 30022V8Z, Руководство по обслуживанию

Страница: 26 / 200

Chapter 3. Routine Maintenance
PELLERIN MILNOR CORPORATION
Table 3: Filters, Screens, and Sensitive Components
Remove contamination from these components to prevent damage and unsatisfactory performance.
Mark
1
2 3 4 5 6
Do this each Component
More Data. See also Section 3.1.3 “How
to Remove Contamination”
x
40 to 60 hours
inverter fans, vents, filters See Figure 8 . Keep good air flow.
x 600 hours
motors Keep good air flow.
x 2400 hours
entire machine Remove excessive dust and dirt.
x
day*
chemical inlet areas Some chemical supplies that stay on machine
surfaces will cause corrosion damage. See
Figure 9 and Section 2.2. “Prevent Damage
From Chemical Supplies and Chemical
Systems”
x 2400 hours
water inlet strainers if
supplied by others
Remove strainers from incoming water lines
and flush with water.
x 2400 hours
strainer in connector for each
valve in 3-compartment
supply injector
See Figure 10
x 200 hours
strainer(s) for air inlet See Figure 13
x 200 hours
strainer for steam inlet.
(Steam is optional on some
models.)
See Figure 12
Table 4: Fluid Containers
Examine. Add fluid if necessary and keep components clean to prevent damage.
Mark
1
2 3 4 5 6
Do this each Component
More Data. See also Section 3.1.4
“Lubricant Identification and Procedures”
x 600 hours
bearing housing remove used oil. Add 22 ounces (650 ml) of
oil 30 ( Table 10 ). See Figure 14
Table 5: Components that Become Worn
Examine. Tighten or replace if necessary, to prevent shutdowns and unsatisfactory performance.
Speak to your dealer for replacement parts
Mark
1
2 3 4 5 6
Do this each Component More Data
x 200 hours
drive belts and pulleys See Supplement 1 and Figure 7
x 200 hours
tubes and hoses Examine hoses and hose connections for
leaks.
22