manualshive.com logo in svg

Milnor 30022H8J, Сервисная инструкция, Страница: 23 / 85

Поделиться
Скачать
Milnor 30022H8J Скачать руководство пользователя страница 23

Avoiding Damage From Allied Remote Chemical Delivery Systems

PELLERIN MILNOR CORPORATION

Figure 3: 

Dribbling From Chemical Supply Line Into Machine

(assumes positive closure at the pump)

Examples

Legend

D.

 Portion of supply line, the contents of which can dribble into the machine

P.

 Pump

T.

 Chemical tank

3.

Design and Installation Recommendations

It is the responsibility of the chemical system manufacturer and supplier to use whatever
measures are necessary to ensure that their system is safe for personnel and equipment.

 The

following are some of the possible methods the manufacturer or supplier may wish to use, as
appropriate.

3.1.

Siphoning: Positively close the line.

—If the pump does not provide positive closure

when the system is off, employ a shutoff valve in the line to serve this purpose.

3.2.

Siphoning: Break the siphon.

—Provide an air gap or vacuum breaker in the chemical

delivery line. This must be located above the “full” line of the tank.

3.3.

Dribbling: Flush the entire chemical delivery line.

—If any concentrated chemical

that remains in the injection line between the pump and the machine is free to flow into the
machine, employ a system that flushes the entire line between the pump and the injection point
with fresh water after each injection.

Содержание 30022H8J






















































































Отзывы:

Нет отзывов