Installation of the ReadyStream
®
filter set
Installation of ReadyStream
®
consumables
Remove the blue cap and
connect the filter to the outlet
of the media preparation unit
Place a bag on the media
unit. Extend the tray for the
10 L bag
Connect the blue connector
of the media bag to the grey
connector of the filter set
Install the tubing on the two
pins
Install the gray dispensing
connector on the media
dispensing unit
Insert the stopcock valve in
the actuator
Position the tubing through
the peristaltic pump. Do not
close the pump
Using the barcode reader,
scan the data matrix code on
the label
Remove the orange cap from
the filter and store it in a
sterile container
Position the tubing in the
guiding pins
Using the barcode reader,
scan the data matrix code on
the media bag
1
Installation of the ReadyStream
®
media bag
2
3
1
2
3
4
5
6
7
8
To place an order or receive technical assistance
Order/Customer Service:
SigmaAldrich.com/order
Technical Service:
SigmaAldrich.com/techservice
Lit. No. MK_PG8448EN
09/2021
© 2021 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved. Merck, the vibrant M, Millipore and ReadyStream are
trademarks of Merck KGaA, Darmstadt, Germany or its affiliates. All other trademarks are the property of their respective owners. Detailed
information on trademarks is available via publicly accessible resources.
Merck KGaA
Frankfurter Strasse 250
64293 Darmstadt, Germany