Settings
21
Production configuration
The system includes a periodic EDI rinsing feature to ensure a good system performance and
water quality is always maintained.
The rinsing will take place at the time of the day set in
Periodic EDI rinsing check time
, that
can be chosen by the system manager to better adapt to the work time schedule.
The system will rinse the EDI for the
Periodic EDI rinsing duration
(1h by default) whenever
the system did not produce Elix water for at least 1 hour during the time period set in the
Periodic EDI rinsing period
(24h by default).
E-POD
®
unit configuration
This app allows a user to configure all parameters specific to E-POD
®
units. These are unique
to the E-POD
®
unit that is being used to input the values.
To duplicate the primary E-POD
®
unit parameters, the action(s) should be repeated on the
secondary E-POD
®
unit.
E-POD
®
unit name
This can be personalized. Click on the text box and input up to a maximum of 8 characters.
Screen brightness
Adjust to the preferred brightness from 1 to 7 using the arrows or click on the box to access
the keypad and type-in the value.
Sound volume
Each E-POD
®
unit can emit a sound when alerts/alarms are triggered. This can be activated or
deactivated using the slider button. The sound can be adjusted to the desired volume by using
the arrows or click on the box to access the keypad and type-in the value. By default, the
sound is deactivated.
Flowmeter offset
The flowmeter has been calibrated in order to achieve volume precision of +/- 5%. Laboratory
glassware accuracy can vary a lot. This setting provides a user with the ability to adapt the
flowmeter to their current glassware accuracy by using an offset function.
Adjust the offset by using the arrows or click on the box to access the keypad and type in the
value. To gain back the original calibration settings, set the value back to 0.
