Miller OM-246 466B, Руководство пользователя

Страница: 32 / 76

OM-246 466 Page 28
4-4. Typical Connection Diagram For MIG (GMAW) Equipment Using A Suitcase Feeder
243 903-A
1 Welding Power Source
.
Attach volt sense lead to work
clamp and attach work clamp
as close to arc as possible.
2 Negative Volt Sense Cable
Connect plug on end of volt sense
cable to volt sense receptacle on
front of welding power source.
3
Interconnect Cable
Connect 14-pin socket into wire
feeder control cable or optional
extension cable. Connect 72-pin
connector to I/O receptacle RC72
on rear of power source. Connect
10-pin connector into receptacle
RC8 on rear of power source.
4
Negative ( − ) Weld Cable
5 Positive (+) Weld Cable
6 Workpiece
7 Wire Feeder 14-Pin Plug
Turn off welding power source
before connecting to wire feeder
14-pin plug.
8
Wire Feeder
9 Gun Trigger Receptacle
10 Gun
11 Gas Hose
12 Gas Cylinder
.
Extension cable maximum
length not to exceed
150 ft (46 m).
13 Extension Cable (Optional)
3
1
3
4
5
12
9
10
8
7
11
2
6
13
.
Keep positive (+) and
negative (
− ) cables
together as much as
possible.