Miller Millermatic 211 Auto-Set, Руководство пользователя

Страница: 31 / 52

.
A complete Parts List is available on-line at www.MillerWelds.com
OM265809 Page 27
SECTION 6 − OPERATION
6-1. Manual Setup
1 Voltage/Material Thickness Control
Turn control clockwise inside white scale
(1-10) to increase voltage (see weld
parameter chart in welding power source
or Section 6-4).
2
Process Select Control
Turn control to select desired weld
process.
3 Wire Speed/Wire Diameter Control
Turn control clockwise inside white scale
(10-100) to increase wire feed speed. (see
weld parameter chart in welding power
source or Section 6-4).
4
Over Temperature Light
If unit overheats, light turns on and output
stops. Allow unit to cool before resuming
operation. This light will also communicate
additional unit errors.
5 Power Light
Power light illuminates when the unit is
turned on and powered up.
6
Power Switch
Use switch to turn unit On or Off.
265381A / 270208A
Rear View
6
1
2
4
5
3
3