CONNECTING WITH STEAM
1.Launch Steam and Sign In.
2.Select ‘big picture mode’
3.Select Steam > Settings
4.Select ‘Controller’
5.Under the ‘Detected Controller’
select the controller (name varies)
6.Select Define Layout
7.Map buttons as per below.
8.Press ‘ESC’
9.Press ‘Save’
BUTTON MAPPING
Primary Action [B] - Button 0
Go Back [A] - Button 1
Tertiary Action [X] - Button 3
Secondary Action [Y] - Button 2
Start [Start] - Button 5
Back [Select] - Button 4
Left Stick X [Left/Right] - Axis 0
Left Stick Y [Up/Down] - Axis 1
DPAD Configurations
The Cantroller can be configured into both XY
axis and Hat Switch configurations.
For XY (default) - Press and hold
START + UP
for 3 seconds until Cantroller blinks.
For Hat Switch - Press and hold
START +
DOWN
for 3 seconds until Cantroller blinks.
Charging
Make sure the power switch is in the “OFF”
position. Plug in the attached micro USB.
Red Light
- Charging
Green Light
- Fully charged
Green and Red Light
- Power switch is not in
“OFF” position
Enjoy the Cantroller
