Miller hydracool 270 CE, Руководство пользователя

Страница: 9 / 20

OM-266 361 Page 5
SECTION 3 − SPECIFICATIONS
3-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on cover of this manual.
3-2. Specifications*
Model
Coolant Tank
Capacity
Maximum Cooling
Capacity
Input Power Dimensions Weight
Hydracool 270 5 L 1470 Watts
(5020 BTU/hr)
1.0 L/min
(1.1 qt/min)
Three Phase
400 VAC
50/60 Hz
0.5 Amperes
Length: 620 mm
Height: 320 mm
Width: 227 mm
23.2 kg
*IEC Cooling Capacity States That The Water Inlet Temperature Can Not Exceed 40
°
C Above Ambient Temperature At A 1l/
Min Flow Rate.
**Plug Is Customer Supplied.
Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns.
Use With Guns/Torches Rated Up To 280 Amperes
3-3. Coolant Chart
MILLER Low Conductivity
Coolant No. 043 810**;
Distilled Or Deionized Water
OK Above 32
°
F (0
°
C)
MILLER Low Conductivity
Coolant No. 043 810**; Or
MILLER Aluminum Protecting
Coolant No. 043 809**;
Distilled Or Deionized Water
OK Above 32
°
F (0
°
C)
GTAW Or Where
HF* Is Used
GMAW Or Where
HF* Is Not Used
Application
*HF: High Frequency Current
**MILLER coolants protect to -37
°
F (-38
°
C) and resist algae growth.
Coolant
MILLER Aluminum
Protecting Coolant
No. 043 809**
Where Coolant Contacts
Aluminum Parts
NOTICE − Use of any coolant other than those listed in the table voids the warranty on any parts
that come in contact with the coolant (pump, radiator, etc.).
Ref. 956142645-4-5
3-4. Environmental Specifications
A. IP Rating
IP Rating Operating Temperature Range Storage Temperature Range
Hydracool 270 − IP23S
This equipment is designed for outdoor use. It
may be stored, but is not intended to be used
outside during precipitation unless sheltered.
−10 to 40
°
C (14 to 104
°
F) 20 to 25
°
C (68 to 77
°
F)